Order Insulators Here: https://www.thegansmann.com/collections/isulators Order Complete Install Kits: https://www.thegansmann.com/collections/insulator-kits Order Gaskets Here: https://www.thegansmann.com/products/base-gaskets Order Adapters Here: https://www.thegansmann.com/products/dual-barrel-solex-40-pii-to-weber-idf-adapter Anyone needing custom work contact us directly: https://www.thegan...
Made from compressed aramid fiber with buna-n nitrile binder. (Except the 28-31 PICT variant which is made from standard gasket paper) What does this mean? It means that the gaskets are naturally non-stick, insulating from excess manifold heat and can withstand sustained temperatures of 520 F with a max temperature rating of 700 F. These gaskets are made right here in our facility in Hobe Sound...
HAD THIS 350 ORIGINAL STD, CRANK. BORE. 11 TO 1 GM 010 4-BOLT BLOCK GN PINK RODS NEVER BEEN RUN JUST SITTING DATED L 12 8 MAKE A FAIR OFFER. JUPITER, FL 33458 (561) 846-0737
I have multiple sets of used but good condition light lenses for the following cars and a few new: $25 per Vw used set, $55 per Audi used set $100 per new set or buy all of them for $300. 1976-1984 VW Rabbit x 1 set used 1993-1998 VW Jetta x 1 set used 1988-1992 Audi 80, 90 x 1 set used, 2 sets new 1986-1991 Audi 80 fog lamps x3 new (lefts only) 1993-1999 VW Golf GTI MK3 x 1 set 1993-1999 VW Je...
Flywheel was swapped out of my TDI powered vanagon for a G60 setup. Ring gear and clutch face are in good shape. If you are trying to piece together the parts for a VW inline conversion, add this to your stack of parts. No warranty expressed or implied. Shipping not included. Thank you for looking.
Removed the sensor from the boat. Not needed anymore. Fuel Sensor could be connected to any NMEA2000Capable MFD and get fuel consumption data, fuel rate and my Simrad kept track of remaining fuel. Senor, NMEA T, and 15' NMEA extension included (the 15' extension has some rash from rigging tube) $120 shipped.
For sale is the running 1.6 NA diesel engine I pulled from our 82 camper when I did the TDI conversion. Odometer had 90 K when I pulled it. It has been stored in the back of my shop for all these years. The original vanagon oil pan and oil pump were lost at some point. To keep the shop out of the block I installed a pan from golf. What you see in the pictures is what you get. No warranty expres...
For sale is the complete automatic transaxle from my 90 camper. It was shifting fine when I pulled it for the syncro conversion. That said, it was weeping transmission fluid. So it should be resealed prior to being installed. It is priced for what most rebuilders are asking as a core charge. No warranty expressed or implied. Buyer is responsible for arranging shipping. I can secure it to a pall...
For sale is an automatic transaxle that was pulled from a non running air cooled 80 vanagon. We started the engine last weekend off the cold start valve and shifted it into drive. The flanges turned, but this is being sold for parts. It may or may not work. Hard parts value exceeds the asking price. No warranty expressed or implied. What you see in the pictures is what you get. Buyer arranges s...
PYPE'S XVA10 STAINLESS STEEL 2.5" CROSSOVER X-PIPE EXHAUSHT KIT $125.00 Vehicle Compatibility 1965-1967 Buick Gran Sport 1965-1969 Buick LeSabre 1964-1972, 1975-1977 Buick Skylark 1965-1969 Buick Wildcat 1965-1969 Chevrolet Bel Air 1965-1969 Chevrolet Biscayne 1966-1969 Chevrolet Caprice 1964-1973 Chevrolet Chevelle 1964-1977 Chevrolet El Camino 1965-1969 Chevrolet Impala 1965-1971 Oldsmobile 4...
I am asking $650 for this complete running used 2.1 WBX engine pulled from my 90 camper. It was removed during the Syncro conversion. I would have reused it, but it was setup with a flex plate for an automatic transmission and the syncro donor engine was solid. It ran out nicely. I did record a video of it idling. Asking $650. What you see in the picture is what you get. Local pickup would be g...
Hello, I am listing this complete used engine for $650. It was pulled from a 1980 Vanagon for an engine conversion. It was not running when it came to us. It has been stored on a loft for 4 years. I started it up over the weekend off of the cold start valve. Fired right up and then did a compression test. Values were 145 PSI on all 4 cylinders. That's all I know. The engine has a flex plate ins...
This is for all 4 center caps and hub caps only. Will fit 04-08 Grand Marquis steel 16 wheels. In pretty good shape some marks in pics. 9 spoke. Text is best 772 538 079nine
383 Chevy stroker Engine, it has all new parts including aftermarket iron 190 cc cylinder heads with 2.02 1.60 valves. This engine has a Comp Cams performance camshaft, full roller rocker arms, and a aluminum intake manifold. 350 4 bolt block is freshly bored with new cam bearings and brass freeze plugs installed. The rotating assembly is brand new Eagle and is computer balanced for a smooth ru...
last weekStuart, FL+17 milesAuto Parts for Sale
SeaVision light crapped out, don't have time to glass over right now. Would like to find an old transducer with a flat surface (mushroom type) to plug the hole temporarily. Anyone know where i can get an old ducer that is no longer in use to serve as a temporary plug?
BRAND NEW FITECH 70050 FUEL INJECTION WIRE HARNESS KIT $600 OBO. JUPITER, FL 33458 (561) 846-0737
39.5 Cuts 39.5 x 18 x 15 cut boggers Excellent Condition Brand new weld rims Wide 5 center sections 8 lug Can change center section to fit any lug pattern. NORTH PALM BEACH, FL 33408 (561) 531-0468